
雙組份打膠機怎么清洗?
時間:2022-02-10 來源:http://m.txxfj.com/ 發布人:昌盛機械
雙組份打膠機分為主動雙組份打膠機和半主動雙組份打膠機。兩種設備的清潔方法根本相同。運用后,有必要清洗。假如不及時清洗兩組分膠,它將在膠管和膠機中凝結,這會影響今后的正常運用。
The two-component gluing machine is divided into active two-component gluing machine and semi-active two-component gluing machine. The cleaning methods of the two devices are basically the same. After use, it is necessary to clean. If the two-component glue is not cleaned in time, it will condense in the hose and glue machine, which will affect the normal use in the future.
雙組份打膠機的清潔根據下一次涂覆時刻的距離分為兩種清潔方法。一個是日常清潔首要是每個班次結束后的清潔操作。還需求進行完全的清潔,這首要是因為設備準備空著,而且這次運用與下次運用之間的距離比較長。兩種清潔方法不同。
The cleaning of two-component glue applicator is divided into two cleaning methods according to the distance at the next coating time. One is daily cleaning, which is mainly the cleaning operation after each shift. Complete cleaning is also required, mainly because the equipment is ready to be empty and the distance between this application and the next application is relatively long. The two cleaning methods are different.

完成后,封閉黑色橡膠運送管和壓力開關,持續輸出白色膠,直到釋放的膠中沒有黑色為止,然后封閉白色橡膠壓力開關,封閉白色橡膠運送開關,清潔完成完成后。
After completion, close the black rubber delivery pipe and pressure switch, and continuously output the white rubber until there is no black in the released rubber, then close the white rubber pressure switch, close the white rubber delivery switch, and after cleaning.
長時刻(超過15天)需求擱置設備:完成生產任務后,封閉雙組份打膠機的壓力開關和輸出開關,取下并清洗膠槍用火油清潔膠管,然后用空壓機中的高壓空氣拆解并吹干管中的膠。
The equipment needs to be shelved for a long time (more than 15 days): after completing the production task, close the pressure switch and output switch of the two-component gluing machine, remove and clean the glue gun, clean the rubber hose with hot oil, and then disassemble and blow dry the glue in the pipe with the high-pressure air in the air compressor.
本文的精彩內容由雙組份打膠機為您提供,本網站還有很多的精彩內容,更多的內容您可以點擊進入:http://m.txxfj.com我們有專門的客服為您解答問題
The wonderful content of this article is provided by the two-component glue applicator. There are many wonderful contents on this website. You can click to enter more contents: http://m.txxfj.com We have special customer service to answer your questions
- 丁基膠涂布機選不對=白耗膠+常返工,昌盛機型實測,47m/min高效省本 2026/04/24
- 中空玻璃封膠不合格=返工虧大錢,中空玻璃加工設備核心解析,精準避坑 2026/04/22
- 全自動中空玻璃生產線僅需3-4人,省人高效,玻璃企業降本必看 2026/04/20
- 避坑!中空玻璃加工設備選不對,60%產能浪費+品質不達標,看完少走彎路 2026/04/13
- 中空玻璃加工設備升級,4大核心革新,解決清洗刮傷、干燥不徹底8大痛點 2026/04/08
- 中空玻璃生產線避坑!傳送帶3大核心優勢,零劃痕+高平穩,產能提升35%不返工 2026/04/07
- 中空玻璃生產線:清洗段全面升級,嬌貴玻璃清洗接近零損傷 2026/04/06
- 中空玻璃加工設備革新:一體鈑金框架告別焊接,穩到零偏差,次品率直降 2026/03/27
- 丁基膠涂布機:中空玻璃氬氣鎖鮮關鍵!實測底部99.9%,邊緣95.6%全達標 2026/03/26
- 山東玻璃廠必看!大小片中空玻璃全自動封膠線,告別殘膠返工,打膠零瑕疵 2026/03/26

當前位置:



產品分類Product categories
聯系我們Contact us
