落地式雙液灌膠機自動膠水加熱功能自動加熱功能在灌膠行業中也是比較常見的，因膠水需求，例如：熱熔膠、紅膠、樹脂膠和硅膠等，膠水特殊性的要求，所以只能根據其要求配置相應的灌膠設備和恒溫裝置，從而滿足到行業的生產需求。
The automatic glue heating function of the floor type double liquid glue filling machine is also common in the glue filling industry. Firstly, due to the special requirements of glue, such as hot melt glue, red glue, resin glue and silica gel, the corresponding glue filling equipment and constant temperature device can only be configured according to their requirements, so as to meet the production needs of the industry.
在硅晶片灌膠中灌膠，一般會使用到加熱的膠水，而在配置的自動灌膠機，必須帶有這個功能，才能夠符合點膠功能要求。膠水經過加熱，可把性能發揮到極致，經過灌膠的效果也會特別的好，不至于會出現無法凝固或者粘接不穩定的問題，滿足膠水特點要求，是灌膠設備基礎配置。
In silicon wafer glue filling, heated glue is usually used, and the configured automatic glue filling machine must have this function to meet the requirements of glue dispensing function. After heating, the glue can give full play to its performance, and the effect of glue filling will be particularly good, so that there will be no problems of non solidification or unstable bonding. It meets the characteristic requirements of glue and is the basic configuration of glue filling equipment.
恒溫裝置在落地式雙液灌膠機在上安裝，可以在壓力桶和點膠閥上進行加熱，讓膠水保持在一個恒定溫度上，保持活躍的性質，可讓涂膠有更好的效果，加熱不是破壞，而且為了更好的進行涂膠，硅晶片灌膠整個面上涂膠，要保證涂膠的面的整潔性，才能夠灌膠出一個較好的膠水面，貼片也是非常的簡單。
The thermostatic device is installed on the floor type double liquid glue filling machine. It can be heated on the pressure bucket and dispensing valve to keep the glue at a constant temperature and keep its active nature, which can make the glue coating have better effect. Heating is not destructive. In order to better glue coating, the whole surface of silicon wafer glue filling shall be coated to ensure the cleanliness of the gluing surface, In order to fill the glue to a better glue surface, the patch is also very simple.
雖然貼紙灌膠與硅晶片灌膠兩者都可以使用落地式雙液灌膠機進行灌膠，只是在某些工藝有些的差別，比如恒溫裝置，在貼紙灌膠是不需要使用到自動加熱功能，恒溫裝置效果就沒有任何的作用了，這就是實際的操作作用，可根據到現實的產品需求，能為您找到合適的生產方式，方便廠家的生產。
Although the floor type double liquid glue filling machine can be used for both sticker glue filling and silicon wafer glue filling, there are some differences in some processes, such as constant temperature device. The automatic heating function is not required for sticker glue filling, and the effect of constant temperature device has no effect. This is the actual operation function, which can be based on the actual product demand, We can find a suitable production mode for you to facilitate the production of manufacturers.
本文的內容是由雙組份打膠機給您提供，我們專注客戶需求，不斷的發展，為客戶提供更多的服務，詳情可參考我們的網站http://m.txxfj.com
The content of this article is provided to you by the two-component gluing machine. We focus on customer needs, continuous development and provide customers with more services. For details, please refer to our website http://m.txxfj.com