它是熱熔膠料的加熱熔化狀態，需要設備的流動溫度。熱熔膠機的熔槽外觀為內外雙層結構的矩形框。內層由金屬材料制成，具有優良的導熱性;外層由角鋼和鋼殼構成，用以支撐熔池。四側墻內層和外層空氣層，可安裝在設備和電線的甲板上，也可作為加熱浴保溫。
It is the heating and melting state of hot melt rubber, which requires the flow temperature of the equipment. The appearance of the melting groove of the hot melt glue machine is a rectangular frame with inner and outer double-layer structure. The inner layer is made of metal material and has excellent thermal conductivity; The outer layer is composed of angle steel and steel shell to support the molten pool. The inner and outer air layers of the four side walls can be installed on the deck of equipment and wires, and can also be used as a heating bath for thermal insulation.
熱熔膠機由箱體、電加熱裝置、環保型熱熔膠溫度計、濾板組成。槽體通常采用鋁合金材料，由一定體積的槽腔熔化，熱熔粘接材料;所述槽的上開口使熱熔膠料牢固，并設有蓋，防止異物進入槽內。所述環保熱熔膠熱熔膠槽設置在加熱電加熱裝置和熱熔膠盒的底部。罐內設有溫度計和控溫裝置，加熱溫度可自動控制，溫控器可調節控制。
The hot melt adhesive machine is composed of a box, an electric heating device, an environment-friendly hot melt adhesive thermometer and a filter plate. The tank body is usually made of aluminum alloy, which is melted by a certain volume of tank cavity and hot-melt bonding material; The upper opening of the groove makes the hot-melt adhesive firm, and is provided with a cover to prevent foreign matters from entering the groove. The environment-friendly hot-melt adhesive hot-melt adhesive tank is arranged at the bottom of the heating electric heating device and the hot-melt adhesive box. The tank is equipped with thermometer and temperature control device. The heating temperature can be controlled automatically and the temperature controller can be adjusted and controlled.
加熱熔池按結構可分為光滑表面結構和網架結構兩種。環保熱熔膠槽表面處理結構，表面與底槽表面光滑平整，槽底表面傾斜低，無出口，結構簡單;熱熔膠材料的腔體結構可適用于任何形狀的熔融固體。
According to the structure, the heating molten pool can be divided into smooth surface structure and grid structure. The surface treatment structure of environment-friendly hot-melt adhesive tank has the advantages of smooth surface and bottom tank surface, low inclination of tank bottom surface, no outlet and simple structure; The cavity structure of hot melt adhesive material can be suitable for molten solids of any shape.

爐體結構的網格劃分，四個側壁的光滑表面上部的開口均采用了環保型熱熔膠，以及蓋板也設置好了，但這要看結構比較復雜。所述下半部、多棒肋、槽體底部格柵鑄置，所述合流熱熔膠液分離器位于每個通道的濾網底部，且進出口均低。對于熔池結構，傳熱面積變大，大大提高了爐膛的熱效率，但相應減小了熔池的有效面積;此外，固體熱熔膠材料的顆?；驂K的形狀、大小一直受到限制。
For the grid division of the furnace body structure, the openings on the smooth surfaces of the four side walls are all made of environmental friendly hot melt adhesive, and the cover plate is also set, but it depends on the complex structure. The lower half, multi rod ribs and the grid at the bottom of the tank body are cast, and the confluence hot melt glue separator is located at the bottom of the filter screen of each channel, and the inlet and outlet are low. For the molten pool structure, the heat transfer area becomes larger, which greatly improves the thermal efficiency of the furnace, but reduces the effective area of the molten pool accordingly; In addition, the shape and size of particles or blocks of solid hot melt adhesive materials have been limited.
除熔體通道結構外，還增設加料料斗、環保型熱熔料斗和熔體罐加料固體熱熔材料。大型組合結構設計，配有預熔池、熱熔膠箱、熱熔膠儲膠箱。
In addition to the melt channel structure, a feeding hopper, an environment-friendly hot-melt hopper and a melt tank are added to feed solid hot-melt materials. Large combined structure design, equipped with pre melting pool, hot melt glue box and hot melt glue storage box.
熱浴腔尺寸應根據熱熔膠涂布包裝生產需要確定。環保熱熔膠生產廠家，的涂膠設備，生產各種規格供客戶選擇，包括小浴槽容積，大容量4kg，預焊坡口裝置容量可達100kg。環保型熱熔膠熔煉池加熱器的熔煉功率主要取決于熔煉溫度、熔煉涂層要求、工作要求等，還通過熔煉池熱熔膠涂層溫度和熔煉池散熱等環境因素。
The size of hot bath chamber shall be determined according to the production needs of hot melt adhesive coating and packaging. Environmental friendly hot melt adhesive manufacturer, professional gluing equipment, produces various specifications for customers to choose, including small bath volume, large capacity of 4kg and pre welding groove device capacity of 100kg. The melting power of the environment-friendly hot melt adhesive melting pool heater mainly depends on the melting temperature, melting coating requirements, working requirements, etc. it also depends on the environmental factors such as the hot melt adhesive coating temperature of the melting pool and heat dissipation of the melting pool.