中空玻璃生產如果經過多個環節，在哪個環節增加設備才能獲得大的效益以及小的投入呢？
If there are many links in the production of hollow glass, in which link can the equipment be added to the maximum benefit and the minimum input?
中空玻璃的整個生產過程大概需要經過玻璃表面的清洗、烘干、鋁條的安裝以及雙組份的密封這么幾個步驟。
The whole process of insulating glass may require cleaning, drying, installation of aluminum strip and sealing the two components through the glass surface.
整個生產過程中又以雙組份的密封這一步為關鍵且耗時多，所以小編認為如果我們資金有限的話可以重點對中空玻璃密封這一步增加設備投入購買一臺雙組份打膠機。
In the whole production process, the two-component seal is the most critical and the most time consuming. Therefore, Xiaobian believes that if our funds are limited, we can focus on the step of sealing the hollow glass and increase the investment of the equipment to buy a two component glue machine.
雙組份密封常用膠水有：硅酮膠、玻璃膠、硅膠等，常規的灌膠機都是把膠水倒進兩個料缸，再通過定量泵配比、混合、定量供膠到產品，而由于雙組份所用膠水粘度都非常高要把這些膠水倒入料缸非常困難.

Two-component sealing glue is used: silicone rubber, silicone rubber, glass, glue pouring machine routine is the glue into the two cylinder, and then to the product through quantitative pump mixing, quantitative glue, and because the two components of the glue viscosity is very high to put the glue into the cylinder is very difficult.
所以雙組份打膠機區別于常規灌膠機的是：雙組份打膠機都是根據客戶所用膠桶規格，量身訂制壓盤，打膠時通過壓盤壓膠，壓盤上配有活塞泵或齒輪泵抽膠，客戶只需把膠桶放到壓盤機定位塊上即可。
So the two-component glue machine is different from the conventional glue machine is a two-component glue machine is used in plastic barrel according to the specifications of customers, tailored to the pressure plate, glue plate by adhesive, pressure plate is equipped with a piston pump or gear pump rubber, customers only need to glue the bucket positioning the pressure plate can block machine.
雙組份打膠機原理跟雙液點膠機一樣，根據客戶AB膠桶量身訂制兩個壓盤，把膠桶放入壓盤下，通過壓盤壓膠再通過定量泵配比、混合、定量打到產品上。
Two-component glue machine principle with double liquid dispensing machine, according to customer tailored two AB glue barrel pressure plate, the glue bucket into the pressure plate, the pressure plate pressure glue through quantitative pump mixing, quantitative hit products.
目前市面的雙組份打膠機大多數為活塞式打膠，由于活塞式有一個抽膠的過程，經常會導致打膠的線條忽大忽小，所以成林數控的雙組份打膠機都是以可連續性供膠的精密齒輪泵抽膠，這樣可保證打膠線條均勻，不會有忽大忽小的情況出現。
At present, the market of the two-component glue machine for the majority of piston glue, the piston has a pumping process, often causes the lines flickering glue small, so the forest NC two-component glue machine is a precision gear pump can be continuous pumping glue glue this may ensure the glue line uniform, there would be no flickering.
臥式雙組份打膠機，完全掌握設備的核心技術遇到任何細小的問題都可以得到完美的解決主要的是該設備投入小、占用廠房空間不大。
Horizontal double component sealing machine, the glue machine is the first CNC forest and apply for a number of international patents, fully grasp the core technology and equipment to meet any small problems can be solved most of the equipment is small investment, little space occupied workshop.
以上便是雙組份打膠機今天的分享，您還滿意嗎，歡迎關注我們的網站:http://m.txxfj.com并且關注我們的產品，我們將為您提供優良的產品，衷心的愿與您建立合作關系。
The above is a two component glue machine today's sharing. Are you satisfied? Welcome to our website: http://m.txxfj.com and pay attention to our products. We will provide you with excellent products and sincerely cooperate with you.