
詳解雙組份打膠機設計三種方法
時間:2020-10-21 來源:http://m.txxfj.com/ 發布人:昌盛機械
雙組份打膠機設計三種辦法:
There are three ways to design a two-component gluing machine
(一)雙組份打膠機機械體系規劃辦法
(1) Planning method for mechanical system of two-component gluing machine
機械體系規劃足研究組成體系的各部分及其內在聯系,從全體體系動身,建基本規劃準則,辯證解決設汁問題的一種規劃分法。體系規劃辦法的主要思維是在規劃過程中強調體系內部和外部環境的聯系,強調全體體系和分體系的聯系,并以之貫穿干整個規劃過程。在分解與綜合中要考慮各分體系聯絡聯系的強弱及其與全體體系相關的完整性。
Mechanical system planning is a kind of planning method which studies the components of the system and their internal relations, starts from the whole system, establishes the basic planning criteria, and dialectically solves the design problem. The main thinking of the system planning method is to emphasize the relationship between the internal and external environment of the system, the relationship between the whole system and the sub-system, and run through the whole planning process. In the process of decomposition and synthesis, the strength of each subsystem's connection and the integrity related to the whole system should be considered.

(二)雙組份打膠機優化規劃辦法
(2) Optimization planning method of two component glue applicator
優化規劃辦法是應用數學優化原理解決實際問題的規劃辦法。針對規劃使命,以結構合理,工作性能佳,成本低等為規劃要求,在多種方案、多組參數、多種規劃變量巾確認主要規劃變量的取值,使之滿足優規劃要求。在機械規劃中,優化規劃體現為傳規劃方案的確認和佳規劃參數的確認。
The method of optimal planning is to solve practical problems by applying the principle of mathematical optimization. In view of the planning mission, taking the most reasonable structure, the best performance and the lowest cost as the planning requirements, the values of the main planning variables are confirmed in a variety of schemes, groups of parameters, and various planning variables, so as to meet the optimal planning requirements. In the mechanical planning, the optimal planning is embodied in the confirmation of the best planning scheme and the best planning parameters.
進行雙組份打膠機優化規劃時,首要需要對具體的工程問題進行比較深化的了解,挑選優化核算辦法,構造合適的數學模型,尋覓優規劃成果,找出佳規劃參數。如減速器規劃中,能夠將資料省和結構緊湊作為規劃方針。這樣,在傳動裝置規劃核算中.應該注意合理挑選熱處理工,參數挑選時盡量使各部分的強度量合理。運用優化規劃辦法,能夠加快規劃過程、縮短規劃周期,達到事半功倍的意圖。
In the optimization planning of two-component gluing machine, it is necessary to have a deeper understanding of the specific engineering problems, select the optimal accounting method, construct the appropriate mathematical model, search for the optimal planning results and find out the optimal planning parameters. For example, in the reducer planning, the most economical data and the most compact structure can be taken as the planning guideline. In this way, in the planning and calculation of transmission device, attention should be paid to the reasonable selection of heat treatment workers, and the strength of each part should be reasonable when selecting parameters. Using the optimization planning method can speed up the planning process, shorten the planning cycle, and achieve the purpose of twice the result with half the effort.
(三)雙組份打膠機牢靠性規劃
(3) Reliability planning of two component gluing machine
牢靠性是指體系在規則時刻內,在給定條件下完結規則功能的能力。產品的牢靠性需有一個定量的表述,但牢靠性的定量表述具有隨機件,對任何產品來講,在其牢靠工作與失效之間,都具有時刻上的不確認性;因而,關于不同類型的牢靠性問題,就需要不同的表述方式,常見的有牢靠度、無故障率、失效率、平均無故障時刻等。合理規劃分配各部分的牢靠性指標,能夠大限度地發揮各部分的規劃優勢,保證產品在工作品質、技術標準和安全運用等文面達到高高質。
Reliability refers to the ability of the system to complete the rule function under the given conditions within the rule time. The reliability of a product needs a quantitative expression, but the quantitative expression of reliability has random parts. For any product, there is uncertainty at any time between its reliable work and failure. Therefore, different types of reliability problems need different expressions, such as reliability, failure free rate, failure rate, average time between failures, etc. Reasonable planning and distribution of the reliable indicators of each part can maximize the planning advantages of each part, and ensure that the products reach high quality in terms of work quality, technical standards and safe use.
- 中空玻璃封膠不合格=返工虧大錢,中空玻璃加工設備核心解析,精準避坑 2026/04/20
- 全自動中空玻璃生產線僅需3-4人,省人高效,玻璃企業降本必看 2026/04/20
- 避坑!中空玻璃加工設備選不對,60%產能浪費+品質不達標,看完少走彎路 2026/04/13
- 中空玻璃加工設備升級,4大核心革新,解決清洗刮傷、干燥不徹底8大痛點 2026/04/08
- 中空玻璃生產線避坑!傳送帶3大核心優勢,零劃痕+高平穩,產能提升35%不返工 2026/04/07
- 中空玻璃生產線:清洗段全面升級,嬌貴玻璃清洗接近零損傷 2026/04/06
- 中空玻璃加工設備革新:一體鈑金框架告別焊接,穩到零偏差,次品率直降 2026/03/27
- 丁基膠涂布機:中空玻璃氬氣鎖鮮關鍵!實測底部99.9%,邊緣95.6%全達標 2026/03/26
- 山東玻璃廠必看!大小片中空玻璃全自動封膠線,告別殘膠返工,打膠零瑕疵 2026/03/26
- 昌盛中空玻璃生產線:充氣超93%+出口俄羅斯,大玻璃穩、封膠嚴,老客戶轉介紹不斷 2026/03/25

當前位置:



產品分類Product categories
聯系我們Contact us
