雙組份打膠機使用的膠有硅酮膠、結構膠等多種。作為較常見和使用廣泛的產品，我將給你一個具體的分析:
　　There are many kinds of adhesives used in the two-component dispenser, such as silicone adhesive, structural adhesive, etc. As a more common and widely used product, I will give you a specific analysis:
　　一個硅橡膠
　　A silicone rubber
　　雙組份打膠機產品特點:
　　Features of two-component dispenser:
　　1.單組分，中性固化，使用方便，在4~40℃溫度范圍內具有良好的擠出性和觸變性。
　　1. Single component, neutral curing, easy to use, good extrusion and thixotropy in the temperature range of 4 ~ 40 ℃.
　　2.附著力強，無腐蝕，無底漆，與大多數建筑材料有良好的粘結性。

　　2. Strong adhesion, no corrosion, no primer, good adhesion with most building materials.
　　3.產品固化后形成耐冷、耐熱、無腐蝕的彈性體，具有優異的耐候性、抗老化性、耐紫外線、耐臭氧、耐高低溫、對環境無污染等性能。
　　3. the product is solidified to form a cold resistant, heat-resistant, non corrosive elastomer. It has excellent weatherability, anti-aging property, UV resistance, ozone resistance, high and low temperature resistance, and no pollution to the environment.
　　4.與其他有機硅膠粘劑具有良好的相容性。
　　4. It has good compatibility with other organic silica gel adhesives.
　　中空玻璃制膠機使用硅酮膠的注意事項:
　　Precautions for using silicone adhesive in hollow glass glue making machine:
　　1. 不能用于結構粘接總成。
　　1. It cannot be used for structural bonding assembly.
　　2. 不適用于所有滲出油脂、增塑劑或溶劑的表面。
　　2. Not applicable to all surfaces that exude grease, plasticizer or solvent.
　　3.不應在密閉空間內使用，也不應與食品或飲用水表面直接接觸。
　　3. It shall not be used in the confined space or directly contacted with the surface of food or drinking water.
　　4、基材表面溫度低于4℃或高于40℃不適宜施工。
　　4. The substrate surface temperature is lower than 4 ℃ or higher than 40 ℃, which is not suitable for construction.
　　5. 雙組份打膠機不適合粘接含銅或銅合金的材料。
　　5. The two-component gluing machine is not suitable for bonding materials containing copper or copper alloy.
　　以上是雙組份打膠機廠家為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://m.txxfj.com
　　The above is the relevant content introduced by the manufacturer of two-component dispenser. For more information, please visit the website: http://m.txxfj.com